• These vertical suction filters are designed to be installed between the pump and the tank. Their main function is to protect the pump.
• Maximum filtration, prevents the formation of air pockets. This prevents damage to the pump and allows immediate optimal operation.
• Allows the elimination of all the materials collected when the element is replaced and prevents the collected material from falling back into the tank.
• The filter structure does not contain areas where the drain fluid can accumulate, so there is no need to drain the pump. Easy to replace, just open the cover to quickly replace the element without removing the piping.
• This filter cartridge cannot be used at positive pressures. Regularly check the pump clogging sensor which indicates when the element becomes dirty, facilitating maintenance and helping to avoid damage to the pump.
• Periodicity of cleaning: It is recommended to clean the filters regularly. As an indication: aluminum machining, every 2 weeks. Other alloys every 3-4 weeks.
FCFA-EM201H-149N-1
Hydraulic filter cartridge - type EM201H-149N
Reference: FCFA-EM201H-149N-1 (002397)
- Filtration: 149 (µm)
- Ø Exter: 100 (mm)
- Ø Inter: 70 (mm)
- Total length: 160 (mm)
- Fluid ambient temperature: 5 to 60 ° C
- Operating pressure: -100 to 0 (Kpa)
- Filter factory tested according to standard: ISO 16889-2008